PTASAPTASA
Slide 1 Slide 1
Slide 2 Slide 2
Slide 3 Slide 3
Slide 4 Slide 4
Slide 5 Slide 5
<
>

PPSC Sub Engineer Civil Past Paper 24 02 2025 | C&W , WASA, GDA , RDA

PPSC Past Paper

2025

Sub Engineer Civil

C&W , WASA, GDA , RDA

Dated: 24/02/2025

Multiple Choice Questions

C&W , WASA, GDA , RDA | Sub Engineer Civil | PPSC Exam : 2025

Question 1:

The maximum tolerance in a 20 m chain is

Question 2:

In well-conditioned triangle no angle should be less than

Question 3:

For drainage pipes in buildings, the test applied before putting them to use is

Question 4:

The maximum number of steps in a flight should generally be restricted to

Question 5:

Number of layer of soil adopted in modified proctor test

Question 6:

For night landing the colour lights at the threshold is

Question 7:

Most fire resisting stone

Question 8:

The rate of payment is made for 100 cu.m (per % cu.m) in case of

Question 9:

Low turbidity of water is detected by

Question 10:

Minimum width of landing of stair

Question 11:

The minimum depth of foundation in clayey soils is

Question 12:

As compared to English bond, double Flemish bond is

Question 13:

Value of deflection angles ranges as:

Question 14:

In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as

Question 15:

What is the minimum crushing strength of a first-class brick in KG/cm²?

Question 16:

Biochemical Oxygen Demand (B.O.D.) of safe drinking water must be

Question 17:

Determining co-efficient of permeability, constant head permeameter is used for such type of soil

Question 18:

According to Darcy's law, discharge will be as;

Question 19:

The vertical post placed at the top and bottom end of a flight supporting the hand rail is

Question 20:

Minimum width of landing should be

Question 21:

Three basic raw materials which are needed in large quantities for production of steel are

Question 22:

Which type of flooring is suitable for use in churches, theatres, public libraries and other places where noiseless floor covering is desired?

Question 23:

Percentage of carbon content in mild steel is

Question 24:

Single Flemish bond consists of

Question 25:

The stretcher bond in brick masonry can be used only when the thickness of wall is

Question 26:

Excavation of sewer line is started from the ________ side

Question 27:

The nature of sag correction is

Question 28:

Water supply includes

Question 29:

Bearing of two lines are 135° and 45° respectively then the angle subtended will be as

Question 30:

Which of the following gradients exerts maximum influence on properties of steel?

Question 31:

Measuring, unit of G.I. pipe.

Question 32:

What are the characteristics of an ideal liquid?

Question 33:

it which temperature, is density of water maximum?

Question 34:

The bearing capacity of a water logged soil can be improved by.

Question 35:

A pipe provided at a maximum water level in a water storage tank to flow on exceeding the capacity of tank is called

Question 36:

The sheet of liquid flowing over a notch

Question 37:

The most economical section of rectangular channel is one which has hydraulic mean depth equal to

Question 38:

Acidity in water is caused due to

Question 40:

In premix asphalt macadam road making method by cold process, the asphalt is heated at this temperature;

Question 41:

The vertical distance between the springing line and highest point of the inner curve of an arch is known as

Question 42:

In case of stable equilibrium metacentre lies at, the position, as compared with Centre of gravity.

Question 43:

A structure made to pass drain over canal is called

Question 44:

most commonly used section in grade aquaduct

Question 45:

For brick construction, the lime-sand mortar, is

Question 46:

Density of mild steel is taken as Kg/m³.

Question 47:

A road sign showing "dead slow" is a such type of road sign

Question 48:

Pitched and sloping roofs are suitable for

Question 49:

The plinth area of a building not includes

Question 50:

The measurement is made in square metre in case of

Question 51:

Horizontal distance between centroids of the sections of cutting and filling is termed as

Question 52:

For branch sewer connection, minimum slope of house sewer.

Question 53:

The term stringer is used for

Question 54:

The most important tool in brick laying for lifting and spreading mortar and for forming joints is

Question 55:

The unit of intensity of loudness is

Question 56:

Project is handed over to parent department after.

Question 57:

A continuous flow of water from one source to other is called,

Question 58:

Dummy activity shown with

Question 59:

Record of speed of vehicle and time consumed during travelling can be determined in this mode of G.P.S.

Question 60:

Intercepting drain is constructed in such direction w.r.t the canal

Question 61:

The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is

Question 62:

Central portion of the earth is termed as.

Question 63:

Permanent hardness of water is due to

Question 64:

%age of domestic water in sewage is usually:

Question 65:

A time period for which a particle of water detains in settling tank is called,

Question 66:

A surface drain suitable for fluctuating discharge,

Question 67:

Curve of varying radius is called.

Question 68:

G.P.S is used to observe,

Question 69:

A water storage tank constructed on the surface of ground is called _______ water tank.

Question 70:

A chemical used for rapid settlement of fine particles is called,

Question 71:

Type of arch generally constructed over a wooden lintel

Question 72:

A mortar joint in masonry which is normal to the face of wall is known as

Question 73:

The rise and fall method doesn't provide check on

Question 74:

The rate of an item of work depends on

Question 75:

A beam of uniform strength has

Question 76:

Prestressed concrete beams are suitable for bridges having

Question 77:

Tie bars in cement concrete pavement are at

Question 78:

Cost of fittings and their fixing is specified for the following sanitary fittings

Question 79:

The asbestos sewer are

Question 80:

Which of the following methods of offsets involves less measurement on the ground?

Question 81:

The site plan illustrates

Question 82:

Resultant pressure "R" at dam is calculated by

Question 83:

The property of a liquid which controls its rate of flow;

Question 84:

A brick which is half as wide as a full brick

Question 85:

Study of flowing liquids and forces causing their motion is called

Question 86:

In the mid-section formula

Question 87:

A lap joint is always in ..... Shear

Question 88:

Which of the following pumps is used to pump sewage solids with liquid sewage without clogging the pump is?

Question 89:

The assumption on which the trapezoidal formula for volumes is based, is

Question 90:

Which of the following is not used in measuring perpendicular offset

Question 91:

The slenderness ratio is the ratio of

Question 92:

A section allows the drafter to create a cutting plane line which is not a straight line across the part

Question 93:

brick walls are measured in sq-m if the thickness of wall is

Question 94:

For hypersonic flow the mach number is

Question 95:

For continues flow type of sedimentation tank

Question 96:

For efficient working of a sewer, it must be ensure that

Question 97:

Coefficient of friction is less when the pavement surface is

Question 98:

The percentage of minimum reinforcement gross cross sectional area of slab is

Question 99:

To support heavy structure in uneven ground.... are used in foundation

Question 100:

Height of bathroom not be less than,



NOTE
If you find any mistake in them, do tell in the comment, so that it can be corrected.

If you face any issues feel free to contact me on WhatsApp
03129671316, 03085507292

If you want more improvement
Share feedback in the comment

INSTRUCTOR
MUHAMMAD BIN JAMEEL
BSC ENGG. CIVIL
 

Post a Comment

Previous Post Next Post